Overview
Overview
The Ubiquiti UniFi Enterprise Campus 24 PoE is a 1U rack-mount Layer 3 managed switch built for enterprise campuses that need high-power PoE delivery, high-speed uplinks, and the redundancy to keep critical networks running. All 24 ports support PoE+++ (up to 90W per port) — enough to power the latest Wi-Fi 7 access points, IP cameras, VoIP phones, and PoE++ devices simultaneously without compromise.
Sixteen 10 GbE RJ45 ports, eight 2.5 GbE RJ45 ports, and two 25G SFP28 uplinks deliver a 460 Gbps switching capacity with 230 Gbps non-blocking throughput. Dual hot-swappable PSUs and four hot-swappable fan modules ensure the switch stays online even during maintenance or hardware failure. Etherlighting™ per-port LED indicators make port status visible at a glance across the full rack.
Key highlights
- 24 × PoE+++ ports — up to 90W per port for Wi-Fi 7 APs and high-power devices
- 16 × 10 GbE RJ45 + 8 × 2.5 GbE RJ45 + 2 × 25G SFP28 uplinks
- 460 Gbps switching capacity, 230 Gbps non-blocking throughput
- Up to 2,250W total PoE budget (200–240V AC shared mode)
- Dual hot-swappable PSUs and four hot-swappable fans for high availability
- Layer 3 managed — DHCP, inter-VLAN routing, and static routing
- Etherlighting™ per-port LED indicators
- 1.3″ touchscreen LCM display for on-switch management
Recommended for
- University & corporate campuses — high-power distribution switch for Wi-Fi 7 APs and dense PoE device deployments
- Data centres & server rooms — 1U rack-mount with redundant PSU and fan for always-on environments
- Stadiums & large venues — powers E7 Campus and E7 Audience APs at scale from a single switch
- Pro AV & broadcast — built-in Pro AV profiles for Dante, NDI, Q-SYS, SDVoE, and more
Performance
Switching performance
Switching capacity table
| Switching capacity | 460 Gbps |
| Non-blocking throughput | 230 Gbps |
| Forwarding rate | 342 Mpps |
| Packet buffer size | 8 MB |
| Supported VLANs | 1,000 |
| MAC address table size | 128,000 |
Layer 3 table sizes
| ARP entries | 128,000 |
| IPv4 routes | 256,000 |
| IPv4 static routes | 512 |
| Access lists (IPv4) | 256 |
| Access lists (MAC) | 256 |
PoE budget
| Power configuration | Total PoE available |
|---|---|
| 200–240V AC Shared (2×1,200W modules) | 2,250W |
| 100–120V AC Shared (2×1,200W modules) | 1,850W |
| 100–240V AC Shared (2×600W modules) | 1,050W |
| 200–240V AC Redundant (2×1,200W modules) | 1,050W |
| 100–120V AC Redundant (2×1,200W modules) | 850W |
| 100–240V AC Redundant (2×600W modules) | 450W |
Features
Layer 3 features
- DHCP server (local networks)
- DHCP relay
- Inter-VLAN routing
- Static routing (local networks)
Layer 2 features
- LACP port aggregation
- STP & RSTP
- QoS (DSCP)
- IGMP snooping
- Advanced IGMP configuration
- 802.1X control
- MAC-based ACLs & device isolation
- IP-based ACLs & network isolation
- DHCP snooping & guarding
- Egress rate limit
- Flow control
- Storm control
- Multicast & broadcast rate limiting
- MAC address blocking
- MAC-based port restriction
- Port isolation
- Port mirroring
- Jumbo frames
- LLDP-MED
- Voice VLAN
- Loop protection
- Virtual network override
Pro AV profiles
- Play
- Dante
- Q-SYS
- NDI
- SDVoE
- Shure
- AES67
- Crestron
Hardware
Physical
| Dimensions | 442.4 × 43.7 × 496 mm (17.4 × 1.7 × 19.5″) |
| Form factor | 1U rack mount, full-depth |
| Weight (without brackets) | 9.46 kg (20.9 lb) |
| Weight (with brackets) | 9.56 kg (21.1 lb) |
| Enclosure | SGCC steel |
| Supported rack depth | 482.6 mm (19″) four-post racks (650–1,000 mm posts) |
| LCM display | 1.3″ touchscreen |
| Management | Ethernet, AR |
Port layout
| 2.5 GbE RJ45 (PoE+++) | 8 ports — 2.5G/1G/100M/10M |
| 10 GbE RJ45 (PoE+++) | 16 ports — 10G/5G/2.5G/1G/100M/10M |
| 25G SFP28 uplinks | 2 ports — 25G/10G/1G |
| Total PoE ports | 24 (all PoE+++) |
| Max PoE per port | PoE 15.4W / PoE+ 30W / PoE++ 60W / PoE+++ 90W |
Power & redundancy
| Power supply | (2) Hot-swappable AC/DC 600W modules (upgradeable to 1,200W) |
| Power input | 100–240V AC, 50/60 Hz |
| Max power consumption | 150W (excl. PoE), 2,400W (incl. PoE) |
| Fan modules | (4) Hot-swappable fan modules |
Environmental
| Operating temperature | -5 to 40°C (23 to 104°F) |
| Operating humidity | 10–90% non-condensing |
In the box
UniFi Enterprise Campus 24 PoE switch with rack mount brackets and two 600W hot-swappable PSU modules. Rack rails and 1,200W PSU upgrades are sold separately.
Software
Managed by UniFi Network
The ECS-24-POE is fully managed through the UniFi Network application — the same centralised platform used to manage UniFi access points, gateways, and cameras. Configure VLANs, PoE schedules, port profiles, inter-VLAN routing, and Layer 3 features from a single interface with no per-device licensing fees.
Core management capabilities
- Port management — configure speed, PoE output, VLAN assignment, and port profiles per port from the UniFi dashboard.
- PoE scheduling — set time-based PoE on/off schedules per port to manage power consumption and device uptime.
- VLAN & routing — create and manage VLANs, configure inter-VLAN routing, and set static routes directly in UniFi Network.
- Remote monitoring — real-time port statistics, power draw per port, and switch health visible from anywhere via UniFi Cloud.
- Firmware updates — push updates remotely without on-site access.
- Pro AV profiles — one-click network optimisation for Dante, NDI, Q-SYS, and other professional AV protocols.
Requirements
| UniFi Network | Version 9.0.114 or later |
| Hosting | Self-hosted or UniFi Cloud |
| Licensing | None — free with no per-device fees |
Documentation
Downloads & resources
Download the Ubiquiti UniFi Enterprise Campus 24 PoE installation guide covering rack mounting, PSU installation, cabling, and first-time setup via UniFi Network.