Overview
Overview
The Ubiquiti UniFi E7 Campus is the outdoor, weatherproof member of the flagship E7 family — purpose-built for large campuses, stadiums, and outdoor high-density deployments. It combines tri-band Wi-Fi 7 (802.11be), 10 spatial streams, and 4×4 MU-MIMO on both 5 GHz and 6 GHz to deliver up to 20.8 Gbps aggregate throughput across 465 m² (5,000 ft²) of coverage and 1,000+ concurrent clients.
Powered and connected over a single Cat6 cable via 10G PoE++ (IEEE 802.3bt) with a redundant 1 GbE failover port — no separate power supply required. The IP67-rated enclosure with included waterproof door kit, directional internal antennas, and PRISM™ active RF filtering make it the definitive choice where interference rejection and all-weather durability are non-negotiable.
Key highlights
- Rugged outdoor IP67 enclosure with included waterproof door kit
- PRISM™ active RF filtering — rejects interference in congested outdoor environments
- Tri-band Wi-Fi 7 with directional internal antennas (up to 12 dBi)
- 10 spatial streams, 4×4 MU-MIMO on 5 GHz and 6 GHz
- 5,000 ft² outdoor coverage, 1,000+ concurrent clients
- Single Cat6 cable carries both power and data via 10G PoE++ (IEEE 802.3bt)
- Redundant 1 GbE failover port for network continuity
- NDAA compliant — suitable for regulated and government deployments
Recommended for
- University & corporate campuses — wide-area outdoor coverage with seamless indoor-outdoor roaming
- Stadiums & arenas — directional antennas handle extreme crowd-scale outdoor density
- Public spaces — parks, plazas, and transport hubs needing all-weather WiFi
- Industrial & government sites — IP67, NDAA compliance, and PRISM RF filtering for demanding environments
Performance
Aggregate throughput
The E7 Campus delivers Wi-Fi 7 performance across three simultaneous outdoor bands. The 6 GHz band uses 320 MHz channel widths for maximum data rates, while directional internal antennas with up to 12 dBi gain concentrate signal where it’s needed and reduce interference from adjacent areas.
Per-band radio specifications
| Spec | 6 GHz | 5 GHz | 2.4 GHz |
|---|---|---|---|
| MIMO | 4×4 MU-MIMO | 4×4 MU-MIMO | 2×2 MU-MIMO |
| Max data rate | 11.5 Gbps | 8.6 Gbps | 688 Mbps |
| Antenna gain | 12 dBi (90°×50°) | 12 dBi (100°×55°) | 9 dBi (90°×80°) |
| Max TX power | 30 dBm (36 dBm EIRP) | 30 dBm | 23 dBm |
| Max BSSIDs | 8 | 8 | 8 |
Supported data rates
| Standard | Data rate range |
|---|---|
| 802.11be (Wi-Fi 7) | 7.3 Mbps – 11.4 Gbps |
| 802.11ax (Wi-Fi 6/6E) | 7.3 Mbps – 4.8 Gbps |
| 802.11ac (Wi-Fi 5) | 6.5 Mbps – 3.4 Gbps |
| 802.11n (Wi-Fi 4) | 6.5 Mbps – 600 Mbps |
Coverage & capacity
| Coverage area | 465 m² (5,000 ft²) |
| Max concurrent clients | 1,000+ |
| Spatial streams | 10 (4 + 4 + 2) |
| Antenna type | Internal directional |
| Channel bandwidth | Up to EHT 320 MHz |
Features
Wireless & roaming
- Wireless meshing
- Band steering
- 802.11r fast roaming
- 802.11k radio resource management
- 802.11v BSS transition management
- Zero-Wait DFS
- Advanced radio management
- Real-time spectral analysis
- PRISM™ active RF filtering
Guest access & hotspot
- Passpoint (Hotspot 2.0)
- Captive hotspot portal
- Custom branding landing page
- Voucher authentication
- Payment-based authentication
- External portal server support
- Guest network isolation
Security & access control
- WPA3 enterprise encryption
- Private Pre-Shared Key (PPSK)
- RADIUS over TLS (RadSec)
- Dynamic RADIUS-assigned VLAN
- Client device isolation
- WiFi speed limiting (per user)
- WiFi schedules
- Password authentication
Compliance
FCC
IC
IP67 Rated
IPX6 Rated
Hardware
Physical
| Device dimensions | 250 × 250 × 45.5 mm (9.8 × 9.8 × 1.8″) |
| Articulating mount | ⌀104 × 149.4 mm (⌀4.1 × 5.9″) |
| Weight (device) | 2.2 kg (4.9 lb) |
| Weight (with mount) | 3.1 kg (6.8 lb) |
| Enclosure | UV-stabilised polycarbonate, aluminium alloy |
| Mount material | Stainless steel, aluminium alloy |
| Mounting | Wall, pole (included), VESA (optional) |
| Pole mount diameter | 25–63.5 mm (1–2.5″) |
| Wind loading | 164.75 N at 200 km/h (37 lbf at 125 mph) |
| LEDs | System R/G/B |
Weatherproofing & durability
| Weatherproofing | IPX6, IP67 with waterproof door kit (included) |
| PRISM™ RF filtering | Yes — active interference rejection |
| Operating temperature | -30 to 60°C (-22 to 140°F) |
| Operating humidity | 5–95% non-condensing |
Networking & power
| Primary uplink | (1) 10 GbE RJ45 — data and power over single Cat6 cable |
| Redundant uplink | (1) 1 GbE RJ45 — failover port |
| Power method | PoE++ (IEEE 802.3bt) — no separate power supply required |
| Supported voltage | 42.5–57V DC |
| Max power consumption | 44W |
Operating frequencies
| Worldwide | 2400–2483.5 MHz, 5150–5850 MHz, 5925–7125 MHz |
In the box
UniFi E7 Campus access point with articulating mount, pole mount hardware, and waterproof door kit. A UniFi 10G PoE++ switch is required to power the unit (not included).
Software
Managed by UniFi Network
The UniFi E7 Campus is fully managed through the UniFi Network application — Ubiquiti’s centralised platform for configuring, monitoring, and scaling enterprise wireless networks. Available as a self-hosted controller or via UniFi Cloud, with no per-device licensing fees and full multi-site management from a single interface.
Core capabilities
- Centralised multi-site management — one controller manages multiple outdoor and indoor deployments, each with its own monitoring, config, and admin accounts.
- Remote firmware updates — push updates to all access points without on-site access, ideal for hard-to-reach outdoor installations.
- Real-time RF monitoring — spectral analysis combined with PRISM™ active filtering detects and rejects interference automatically.
- Network & VLAN configuration — per-SSID VLANs, 802.1Q tagging, and dynamic RADIUS-assigned VLANs for granular outdoor network segmentation.
- Guest hotspot & captive portal — custom-branded portals with voucher, payment, or password auth plus Passpoint (Hotspot 2.0) for carrier-grade roaming.
- Per-user speed limiting — upload/download caps per user or SSID for fair bandwidth management across large outdoor crowds.
Requirements
| UniFi Network | Version 9.0.114 or later |
| Mobile app (iOS) | Version 10.20.0 or later |
| Mobile app (Android) | Version 10.21.3 or later |
| Hosting | Self-hosted or UniFi Cloud |
| Licensing | None — free with no per-device fees |
Documentation
Downloads & resources
Download the Ubiquiti UniFi E7 Campus quick installation guide covering outdoor mounting options, weatherproofing, cabling, PoE++ requirements, and first-time setup.