Overview
Overview
The Ubiquiti UniFi E7 Audience is Ubiquiti’s most advanced stadium-grade access point — engineered specifically for extreme high-density venues where standard enterprise APs simply cannot cope. Unlike the E7 and E7 Campus, the E7 Audience runs dual 6 GHz radios (low band and high band) alongside a dedicated 5 GHz radio, giving 12 spatial streams and a combined 31.6 Gbps aggregate throughput across 465 m² (5,000 ft²) of directional coverage for 1,500+ concurrent clients.
Powered and connected over a single Cat6 cable using 10G PoE++ (IEEE 802.3bt) with a redundant 1 GbE failover port — no separate power supply required. The IP68-rated enclosure (full dust-tight and submersion-proof), PRISM™ active RF filtering, and high-gain directional antennas (up to 15 dBi) make this the definitive choice for arenas, stadiums, outdoor festivals, and any venue where thousands of devices connect simultaneously.
Key highlights
- Dual 6 GHz radios (low band + high band) plus 5 GHz — no 2.4 GHz congestion
- 12 spatial streams, 4×4 MU-MIMO across all three radios
- 1,500+ concurrent clients — the highest client count in the UniFi range
- 31.6 Gbps aggregate throughput (11.5 + 11.5 + 8.6 Gbps)
- PRISM™ active RF filtering — built for congested stadium RF environments
- IP68-rated — full dust-tight and weatherproof for permanent outdoor installation
- Directional antennas up to 15 dBi for precise sector coverage
- Single Cat6 cable carries power and data via 10G PoE++ (IEEE 802.3bt)
- NDAA compliant — suitable for regulated and government deployments
Recommended for
- Stadiums & arenas — purpose-built for crowd-scale density with sector coverage and 1,500+ clients per AP
- Outdoor festivals & events — IP68 weatherproofing and wind resistance at 200 km/h
- Transport hubs — airports, train stations, and large concourses with permanent high-traffic outdoor WiFi
- Government & defence — NDAA compliant with RadSec and WPA3 enterprise security
Performance
Aggregate throughput
The E7 Audience uses three radios across dual 6 GHz bands and 5 GHz — there is no 2.4 GHz radio. This keeps all clients on high-performance spectrum, eliminating legacy 2.4 GHz interference entirely. Both 6 GHz radios use 320 MHz channels for maximum throughput, with directional antennas that concentrate signal precisely within a venue sector.
Per-band radio specifications
| Spec | 6 GHz Low | 6 GHz High | 5 GHz |
|---|---|---|---|
| MIMO | 4×4 MU-MIMO | 4×4 MU-MIMO | 4×4 MU-MIMO |
| Max data rate | 11.5 Gbps (BW320) | 11.5 Gbps (BW320) | 8.6 Gbps (BW240) |
| Antenna gain (narrow) | 15 dBi (50°×50°) | 15 dBi (50°×50°) | 15 dBi (50°×50°) |
| Antenna gain (wide) | 11 dBi (90°×90°) | 11 dBi (90°×90°) | 11 dBi (90°×90°) |
| Max TX power | 30 dBm (36 EIRP) | 30 dBm (36 EIRP) | 30 dBm |
| Max BSSIDs | 8 | 8 | 8 |
Supported data rates
| Standard | Data rate range |
|---|---|
| 802.11be (Wi-Fi 7) | 7.3 Mbps – 11.5 Gbps |
| 802.11ax (Wi-Fi 6/6E) | 7.3 Mbps – 4.8 Gbps |
| 802.11ac (Wi-Fi 5) | 6.5 Mbps – 3.4 Gbps |
| 802.11n (Wi-Fi 4) | 6.5 Mbps – 600 Mbps |
Coverage & capacity
| Coverage area | 465 m² (5,000 ft²) |
| Max concurrent clients | 1,500+ |
| Spatial streams | 12 (4 + 4 + 4) |
| Antenna type | Internal directional (dual-pattern) |
| Channel bandwidth | Up to EHT 320 MHz |
Features
Wireless & roaming
- Wireless meshing
- Band steering
- 802.11r fast roaming
- 802.11k radio resource management
- 802.11v BSS transition management
- Zero-Wait DFS
- Advanced radio management
- Real-time spectral analysis
- PRISM™ active RF filtering
Guest access & hotspot
- Passpoint (Hotspot 2.0)
- Captive hotspot portal
- Custom branding landing page
- Voucher authentication
- Payment-based authentication
- External portal server support
- Guest network isolation
Security & access control
- WPA3 enterprise encryption
- Private Pre-Shared Key (PPSK)
- RADIUS over TLS (RadSec)
- Dynamic RADIUS-assigned VLAN
- Client device isolation
- WiFi speed limiting (per user)
- WiFi schedules
- Password authentication
Compliance
FCC
IC
IP68 Rated
Hardware
Physical
| Device dimensions | 474.1 × 265.5 × 42.2 mm (18.7 × 10.5 × 1.7″) |
| Bracket dimensions | 150.4 × 113.6 × 125 mm (5.9 × 4.5 × 4.9″) |
| Weight (device) | 3.3 kg (7.3 lb) |
| Weight (with mount) | 4.3 kg (9.5 lb) |
| Enclosure | UV-stabilised polycarbonate, aluminium alloy |
| Mount material | Aluminium alloy |
| Mounting | Wall, pole (included), VESA (optional) |
| Pole mount diameter | 25–76 mm (1–3″) |
| Wind loading | 164.75 N at 200 km/h (37 lbf at 125 mph) |
| LEDs | System R/G/B |
Weatherproofing & durability
| Weatherproofing | IP68 — full dust-tight and submersion-proof |
| PRISM™ RF filtering | Yes — active interference rejection |
| Operating temperature | -40 to 60°C (-40 to 140°F) |
| Operating humidity | 5–95% non-condensing |
Networking & power
| Primary uplink | (1) 10 GbE RJ45 — data and power over single Cat6 cable |
| Redundant uplink | (1) 1 GbE RJ45 — failover port |
| Power method | PoE++ (IEEE 802.3bt) — no separate power supply required |
| Supported voltage | 42.5–57V DC |
| Max power consumption | 51W |
Operating frequencies
| Worldwide | 5150–5850 MHz, 5925–7125 MHz |
In the box
UniFi E7 Audience access point with mounting bracket and pole mount hardware. A UniFi 10G PoE++ switch is required to power the unit (not included).
Software
Managed by UniFi Network
The UniFi E7 Audience is fully managed through the UniFi Network application — Ubiquiti’s centralised platform for configuring, monitoring, and scaling enterprise wireless networks. Available as a self-hosted controller or via UniFi Cloud, with no per-device licensing fees and full multi-site management from a single interface.
Core capabilities
- Centralised multi-site management — one controller manages multiple venues and sites, each with its own monitoring, config, and admin accounts.
- Remote firmware updates — push updates to all access points without on-site access, ideal for hard-to-reach stadium installations.
- Real-time RF monitoring — spectral analysis combined with PRISM™ active filtering detects and rejects interference automatically across all three radios.
- Network & VLAN configuration — per-SSID VLANs, 802.1Q tagging, and dynamic RADIUS-assigned VLANs for granular network segmentation across large venues.
- Guest hotspot & captive portal — custom-branded portals with voucher, payment, or password auth plus Passpoint (Hotspot 2.0) for carrier-grade roaming.
- Per-user speed limiting — upload/download caps per user or SSID for fair bandwidth management across crowds of thousands.
Requirements
| UniFi Network | Version 9.2.87 or later |
| Mobile app (iOS) | Version 10.24.1 or later |
| Mobile app (Android) | Version 10.25.2 or later |
| Hosting | Self-hosted or UniFi Cloud |
| Licensing | None — free with no per-device fees |
Documentation
Downloads & resources
Download the Ubiquiti UniFi E7 Audience quick installation guide covering outdoor mounting options, weatherproofing, cabling, PoE++ requirements, and first-time setup.